Selling Price -
$17,750.00
2020 Westfield MKX 10 83
Westfield took its most popular auger and made it even better! The MKX 10 is everything you have come to expect from a Westfield 10" swing auger and includes all of the performance enhancements of the MKX 13 and 16 Series, specializing in ease-of-use and serviceability.
- 10" diameter
- 53' - 83' lengths
- up to 6,600 bph
Features may include:
Wear Edge Technology™Westfield developed Wear Edge Technology™ to extend the life of the flighting. This provides an extra layer of steel welded to the edge on critical wear points. As a result, flighting lasts longer and needs to be replaced less often – saving time and money.
Powder Coat PaintWestfield uses a durable powder coat paint for a strong, long lasting finish that looks good and protects against rust.
A-Frame UndercarriageThe MKX Series features an A-frame undercarriage to withstand bowing and maintain rigid alignment during heavy loads.
Low Profile HopperThe low profile hopper features left and right hand flighting to pull grain toward the center of the hopper so it flows efficiently up into the tapered boot – maximizing capacity and minimizing unload time.
- 2020
- Westfield
- MKX 10
- 83
- General
- 35E Constant Velocity with 5 /16" (8MM) Shear Bolt
- WITH DRY WHEAT: 75 HP (55.9 kW)
- 16" (40.6cm)
- TREAD: 112” - 144”
- REQUIRED TO RAISE AUGER: 1800 PSI (124.1 bar)
- One 4 ½" (11.4cm) with 3 /8" (1cm) Aircraft Cable
- Heavy-Duty 6-Bolt Iron Hubs
- TUBE CONNECTORS: Heavy-Duty 3 /16" (0.5cm) Angle Flange | MAIN FLIGHTING: 9" (22.9cm) OD x 7 GA Stretched and Welded with Wear EdgeTM at Critical Points | Wear EdgeTM (Reinforced FlighT): ¼" (0.6cm) plus 10 GA Ribbon Weld = 5 /16" (0.8cm) Wear EdgeTM on Critical Grain Transfer Points | FLIGHTING SHAFT: High Strength 2" (5.1cm) OD x 11 GA Tubing Square Flight Connection | UPPER BEARING: 1 ¼" (3.2cm) Pillow Block Greaseable Ball Bearing | LOWER BEARING: 1 ½" (3.8cm) Pillow Block Greaseable Ball Bearing | TUBE TRUSSING: 3 /8" (1cm) Aircraft Type Galvanized Steel Cable | UNDERCARRIAGE: 3 ½" (8.9cm) x 11 GA A-frame
- LOW PROFILE HOPPER: 63" (160cm)
- LOW PROFILE HOPPER: 40" (101.6cm)
- LOW PROFILE HOPPER: 10.5" (26.7cm)
- 12' 8" (3.9m)
- 3 ½" (8.9cm) x 3 ½" (8.9cm) x 3 /16" (0.5cm) Wall Square Tubing
- PARKING JACK: 2000 LB (907.2 kg) Side Wind
- 14 GA
- SPROCKET: Hardened Tooth Sprocket with #60 Chain
- $17,750.00
- Arenzville
- Pre-Owned
- 2020
- Westfield
- MKX 10 83
- WFO2A2420326882
- Available
- LOW PROFILE HOPPER: 40" (101.6cm)
- LOW PROFILE HOPPER: 10.5" (26.7cm)