2023 Land Pride RC2512 Base
- Year 2023
- Make Land Pride
- Model RC2512
2023 Land Pride RC2512
Land Pride's RC2512 Rotary Cutter is designed for smaller tractors while retaining the features and benefits of larger folding cutters. The 12' width, sharp turning radius, and low tongue weight makes this an ideal Rotary Cutter for compact tractor owners that need a large rotary cutter for light agricultural and municipal grass maintenance.
Features may include:
GEARBOX WARRANTY- 5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.
- These cutters offers 1-1/2" cutting capacity. See Operator's Manual for more information.
- Helps keep park jack vertical when in use.
- LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.
- Wing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.
- Round stump jumper allows cutter to slide over obstructions protecting gearbox output shaft & bottom seal.
- Deck-mounted spring cushion provides a smooth ride in rough terrain.
- Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain.
- Narrow tongue design handles tight turns - great size for country estates.
Engine
Bore
Center hydraulics: 2 1/2" | Wings Hydraulics: 2"
Engine Power
40-100 HP
Stroke
Center hydraulics: 8" | Wings Hydraulics: 8"
Drivetrain
Driveline
Input: Cat. 4 CV | Connecting: Cat. 3 Slip Clutch
Gearbox
Rating: 160 HP Divider; 100 HP Center & Wings | Input Shaft: 1-3/8" 6 Spline / Output: 1-1/2"
Suspension
Suspension
Spring on Center Deck
Wheels & Tires
Wheels
21" Laminated Tires or 20.5" Aircraft Tires
Operational
Operating Speed
Blade tip speed At 540 rpm: Center Blades - 16,500 FPM / Wing Blades - 16,000 FPM
Chassis
Deck Thickness
10 Gauge
Hitch/Type
Pull-Type; Standard Clevis, LP Performance Self-Leveling
Dimensions
Dimensions
Side Panel Thickness: 3/16" | Cutting capacity: 1 1/2" Diameter | Blade overlap: 6" | Dishpan: 10 Gauge, Round, Dish Shaped with 1" x 3-1/2" Blade Bar | Max. Turning Angle: 80° with CV | Blades: 1/2" x 3" Uplift
Deck Height
11"
Height
Cutting: 1 1/2" - 12"
Overall Width
12'7"
Overall Length
13'3"
Transport Width
Minimum: 7'11"
Width, Working Position
12' (366 cm)
Weights
Weight
Tongue: 793 lb | Machine: 2,540 lbs (1152 kg)
Features
Features
Skid shoes: Wings & Center, Replaceable | Blade bolt: Keyed with Hardened Flatwasher & Lock Nut | Front & rear guards: Single chain